Yes, every Santa Fe guard is licensed through the New Mexico Regulation and Licensing Department, Private Investigations Advisory Board. That licensing is the baseline, and on top of it our officers are background-checked, insured, and credentialed for fire watch work. Assignments that call for an armed officer are filled by personnel holding the proper New Mexico firearm endorsement.

Most central Santa Fe addresses see a guard in 60 to 120 minutes. Properties out in the wider Santa Fe County metro typically run 2 to 3 hours, and the farthest outlying sites can reach 4. Our dispatch line runs 24 hours a day.

They will, because our logs are built to the documentation the Santa Fe Fire Department and the New Mexico State Fire Marshal’s Office look for: GPS time stamps, photos, and guard signatures on every round, handed over as a clean record.

We do, with standing fire watch coverage at hotels, galleries, government buildings, and corporate sites across downtown Santa Fe and out through the surrounding districts and Santa Fe County.

Construction is one of our heaviest categories, especially NFPA 241 coverage on historic-district restorations and new lodging builds. We put multi-guard rotations on extended jobs and hold the coverage for as long as the work runs.

Rates move with the watch duration, the time of day, and how many guards the job needs. Call 1-800-899-7524 and we will turn a specific quote around for you, usually inside 15 minutes.

The Santa Fe Fire Department enforces the New Mexico Fire Code, based on the International Fire Code (IFC), and it spells out when a watch is mandatory: a fire alarm down more than 4 hours in any 24, a sprinkler impaired past 10 hours, hot work in occupied space under IFC Chapter 35 and NFPA 51B, construction sites without finished fire protection under IFC Chapter 33 and NFPA 241, special events using temporary structures, and any interim watch a fire marshal orders after a violation.

It is an unbroken, documented patrol run by a trained, certified guard on a fixed schedule, usually every 15 to 30 minutes depending on the property. Hotels and big restoration jobs get multi-guard rotations. Each pass records a time stamp, GPS, what the guard observed, photos, and a signature, and the coverage holds 24/7 with logged shift handoffs until the impaired system is back and the Santa Fe Fire Department’s documentation is satisfied.

They patrol the property for fire, spot ignition sources and hazards before they catch, supervise hot work through the required 30-minute post-work hold, stay in contact with property management and dispatch, log every round, and call in first-response notification if anything ignites. Each Santa Fe Fire Watch Guard is licensed through the New Mexico Regulation and Licensing Department and carries NFPA and OSHA fire watch credentials, with added training for construction, healthcare, and historic-building settings.

The Fast Fire Watch Company does, across Santa Fe and the rest of Santa Fe County. We field certified guards on site in under 3 hours, available 24/7, for impairments, hot work, construction, and special events, with Santa Fe Fire Department-compliant documentation on every job.

Usually within a few hours of your call, and quicker still near the Plaza, the historic district, or Canyon Road, because our guards already work those corridors rather than driving in from out of region. The line is staffed 24 hours a day, year-round. Give us the address, what set off the need, and how long you expect to need coverage, and we will lock in a guard and a start time on the same call.

Any time a building’s built-in protection is impaired or hot work is live, New Mexico requires a watch. That covers a sprinkler out of service under NFPA 25, an alarm offline under NFPA 72, welding or cutting under IFC Chapter 35 and NFPA 51B, and construction conditions under IFC Chapter 33 and NFPA 241. The Santa Fe Fire Department enforces all of it under the New Mexico Fire Code. Not sure your situation qualifies? Call and we will work through it with you before sending anyone.

It comes down to the property size, how many guards the code or your permit requires, and the patrol schedule you need to hold. There is no long-term contract, so you pay for the actual coverage window, whether that is one overnight shift during hot work or several weeks while a sprinkler system gets rebuilt. We quote a clear rate before any guard is dispatched, and we do not bury setup fees in it.

The guard works a fixed route on a set interval, scanning for smoke, heat, and any early sign of fire, and logs each pass with a time stamp and name. If fire breaks out, the guard calls 911 at once and runs the building’s evacuation plan. On hot work, the guard keeps an extinguisher in reach and stays on for 30 to 60 minutes after the torches go cold. That finished log is your coverage proof for the Santa Fe Fire Department.

Usually they do. Santa Fe hotels and historic-district buildings routinely pull alarm or sprinkler systems for upgrades, standpipe repairs, and restoration work, and under NFPA 25 and NFPA 72 a building cannot stand unprotected while those systems are down. A watch bridges the gap until repairs pass verification. We patrol these buildings room by room through such projects and log every pass, leaving the property a clean record for the Santa Fe Fire Department and the Santa Fe County program.

Because among Santa Fe fire watch companies, we put a licensed guard on your property fast, staff the coverage around the clock, and document every round to the New Mexico Fire Code standard the Santa Fe Fire Department enforces. Historic-district restorations, downtown hotels, capitol-area offices, Canyon Road galleries, we know the buildings and the inspectors who walk them. Call and you get a guard, a straight rate, and a record the fire marshal will accept.